The stones used are roughly dressed by fracture; they
are irregular in shape, and of a size convenient for one man to handle.
They are laid with only a very little mud mortar, and carried up, if the
ground be level, to within 18 inches of the surface. If the kiva is
built on the edge of the cliff, as at Walpi, the outside wall connects
the sides of the gap, conforming to the line of the cliff. If the
surface is sloping, the level of the roof is obtained by building up one
side of the kiva above the ground to the requisite height as illustrated
in Fig. 21. One end of the "Goat" kiva at Walpi is 5 feet above ground,
the other end being level with the sloping surface. When the ledge on
the precipitous face of the mesa is uneven it is filled in with rough
masonry to obtain a level for the floor, and thus the outside wall of
some of the Walpi kivas is more than 12 feet high, although in the
interior the measurement from floor to ceiling is much less.
Both cottonwood and pine are used for the roof timbers; they are roughly
dressed, and some of them show that an attempt has been made to hew them
with four sides, but none are square. In the roof of the "Goat" kiva,
at Walpi, are four well hewn pine timbers, measuring exactly 6 by 10
inches, which are said to have been taken from the mission house built
near Walpi by the Spanish priests some three centuries ago. The ceiling
plan of the mungkiva of Shupaulovi (Fig. 23) shows that four of these
old Spanish squared beams have been utilized in its construction.
Pages:
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213