[Illustration: Plate LXVI. Kinna-Zinde.]
Perhaps the most noteworthy characteristic of pueblo masonry, and one
which is more or less present in both ancient and modern examples, is
the use of small chinking stones for bringing the masonry to an even
face after the larger stones forming the body of the wall have been laid
in place. This method of construction has, in the case of some of the
best built ancient pueblos, such as those on the Chaco in New Mexico,
resulted in the production of marvelously finished stone walls, in which
the mosaic-like bits are so closely laid as to show none but the finest
joints on the face of the wall with but little trace of mortar. The
chinking wedges necessarily varied greatly in dimensions to suit the
sizes of the interstices between the larger stones of the wall. The use
of stone in this manner no doubt suggested the banded walls that form so
striking a feature in some of the Chaco houses. This arrangement was
likely to be brought about by the occurrence in the cliffs of seams of
stone of two degrees of thickness, suggesting to the builders the use of
stones of similar thickness in continuous bands. The ornamental effect
of this device was originally an accidental result of adopting the most
convenient method of using the material at hand. Though the masonry of
the modern pueblos does not afford examples of distinct bands, the
introduction of the small chinking spalls often follows horizontal lines
of considerable length.
Pages:
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248