Only two examples were discovered by Mr. L. H. Morgan in a
ruined pueblo on the Animas. "One of these measured 16 by 17 inches and
the other was 16 inches square. Each was formed in the floor by pieces
of wood put together. The work was neatly done."[8]
[Footnote 8: Contributions to N.A. Ethnology, vol. 4. House Life,
etc., p. 182.]
[Illustration: Fig. 99. Halved and pinned trapdoor frame of a Zu?i
kiva.]
[Illustration: Plate CI. Masonry chimneys of Zu?i.]
Unfortunately, Mr. Morgan does not describe in detail the manner in
which the joining was effected, or whether the pieces were halved or cut
to fit. It seems hardly likely, considering the rude facilities
possessed by the ancients, that the enormous labor of reducing large
pieces of wood to such interfitting shapes would have been undertaken.
A certain neatness of finish would undoubtedly be attained by arranging
the principal roof beams and the small poles that cross them at right
angles, in the usual careful manner of the ancient builders. The kiva
roof opening, with the hole serving for access and smoke exit, is
paralleled in the excavated lodges of the San Francisco Mountains, where
a single opening served this double purpose. A slight recess or
excavation in the side of the entrance shaft evidently served for the
exit of smoke.
At the village of Acoma the kiva trapdoors differ somewhat from the Zu?i
form. The survey of this village was somewhat hasty, and no opportunity
was afforded of ascertaining from the Indians the special purpose of the
mode of construction adopted.
Pages:
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338