]
The dotted line A B represents the direct ray, and the line A C D the
reflected one. Fig. 3 shows the different geometrical and
trigonometrical elements of the curve, which can be read upon the
various scales, or to which the instrument may be set. An observer
standing at C sights the point B directly and the point A by
reflection. A staff being set up at each point, he will see them
simultaneously, and in coincidence if the instrument be properly set
for the curve. If any intermediate position be taken up on the curve,
both A and B will be seen in coincidence. If the two rods do not
appear superimposed, the operator must move to the right or the left
until this is the case. The instrument will then be over a point in
the curve. Any number of points at any regular or irregular distances
along the curve can thus be set out. One of the simplest elements
which can be taken as a datum is the ratio of the length of the chord
to the radius, AB/AO, Fig. 3. This being given, the value of the ratio
is found on the straight scale on the body of the instrument, and the
curved plate is moved until the beveled edge cuts the scale at the
desired point.
Pages:
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73